QIOTEK ZealotH743 PIXHAWK Flight Control PIX Vertical RC Helicopter Multi Axis with M10S TTL GNSS - Standard version + GPS

QIOTEK ZealotH743 PIXHAWK Flight Control PIX Vertical RC Helicopter Multi Axis with with M10S TTL GNSS User Manual Description：The QioTek ZealotH743 is an internal vibration dampened autopilot with a protective CNC metal case for ruggedness.It features fully redundant sensors, an expanded number of outputs, temperature-controlled IMUs, and has an integrated AT7456E OSD chip. The Zealot-H743 has higher specs than many competitors!The Zealot H743 supports all versions of Ardupilot from 4.2.0 including ArduPlane, ArduCopter, ArduRover, ArduSub. SpecificationsProcessor:MCU - STM32H743VIT636KB FRAM - FM25V02Standard Edition SensorsGyro/Accelerometers: ICM42688P, ICM40605, ICM20689Barometers: DPS3018 *2Compass: QMC5883L Power4.1-6.0V DC from USB (internal circuitry and RX only) or via 2 x PowerModule connectors, or via internal BEC off VBAT input pin. All 5V pins are powered when USB, or Power Module(s), or VBAT input is used.Internal 5V, 1.5A internal BEC directly can be used with up to 6S LIPO batteries to supply board and peripheral power supply up to 1.5A max with voltage monitoring via BAT2 monitor(500ma max recommended).ADC monitoring of board voltageADC monitoring of Servo/Output’s power railInterfaces/Connectivity14 PWM Outputs with independent power rail for external power source4 Relay outputsMicroSD card slotMicro USB or remote USB via a JST_GH connectorBuilt-in RGB LED (On three sides)Built-in AT7456E OSDFD-CAN interface *2Two voltage & current monitoring and servo rail voltage monitoring(support to 36V)Two ADC inputs(default one for RSSI, one for Airspeed sensor, both support to 6.6V)Servo rail BEC independent power input for servosBuilt-in BEC (6S 1.5A) power input (share power2 module voltage monitoring)UART interface *5 Package Included:1x ZealotH743 PIXHAWK Flight Control1x M10S TTL GNSS Module1x Wifi Bridge Module1x 14S ammeter+cable1x External safety Switch/Buzzer 1x External 60V/14S power module 1x I2C/CAN splitter board2x Uart/OSD cable2x Uart/AUX cable1x BAT/BEC cable1x 32G SD Card for logging, scripts and terrain data1x Double tape 1x USB-C/Standard USB cable