Phoenix Gold ZLOC4.4 Audio System

The ZLOC4.4 is the essential solution for enhancing your vehicle’s audio system. While many vehicles now come with integrated amplifiers, the original OEM system often falls short in terms of performance. Replacing the entire audio system can be costly and sometimes not feasible. That’s where our ZLOC converters step in. Not only do they reduce distortion, but they also allow for seamless integration of aftermarket audio components into your OEM system. Gone are the days of being unable to upgrade your head unit – our ZLOX converters cleverly bypass OEM resistance, all while eliminating unwanted system noise. Upgrade your audio experience today with our advanced OEM integration solution. The ZLOC4.4 has four high-level inputs that take the speaker signal from the OEM head unit or amplifier and convert it to four low-level outputs. This allows you to add external amplifiers to install an aftermarket subwoofer, add more power or more speakers. The ZLOC4.4 is equipped with a built-in CLIP indicator that flashes when it senses distortion on the input or output signal. This lets you easily see when the input signal distorts and lets you adjust the output signal without any clipping for a distortion-free signal all the way. Bass CUBEPhoenix Gold Bass CUBE is built into the ZLOC4.4. This feature allows you to finely tune the bass level by choosing a centre frequency between 20Hz – 110Hz to a level between -9dB to +9dB with a variable Q value. ZLOC4.4 Specifications Speaker Input 4CH Outputs 4CH REM In Yes REM Out Yes Load Select 10-Ohm / 60-Ohm / 20K-Ohm Ground Isolation GND/ISO/200-Ohm Gain Yes,X2 Clipping Yes,X2 Center Frequency 20Hz-110Hz Bass Level -9 ~ +9dB Turn On Mode REM/DC/AUDIO Input Mode 2CH/4CH Remote None Dimensions(LxWxH)mm 150.6x82x24.8mm Chassis Body Aluminum Operating Voltage Input Sensitivity 0.5 to 32V Operating Voltage 9 to 32V Output Voltage Max. 7.5V @ 14.4V Max 40V as Input Must be 20K-ohm load Signal to Noise >100dB @6.4V output Input Impedance 10-Ohm / 60-Ohm / 20K-Ohm Frequency Response 10-30kHz THD+N <0.01% Output Impedance < 120-ohm Max Current Draw 121 - 150 mA Turn-On Trigger, DC 3 to 7V Gain -28 to 0dB Terminal Gauge Quick Connect / 16# AWG