Liqui Moly 21217 Top Tec 6300 0W-20 STJLR.51.5122 Engine Oil - 5 Litres

Premium low-friction motor oil based on synthetic technology. Complies with highest requirements resulting from the development of ever smaller, more powerful engines in the interests of more efficient vehicles and lower emissions. Specially developed for the requirements of motor vehicles from Jaguar, Land Rover and Mercedes-Benz. Ensures optimum lubrication, outstanding lubricating film stability and minimum wear and deposits even under extreme loads. Ideally suited for engines with start/stop system. Guarantees maximum performance with low fuel consumption. Key Benefits: Smooth engine running Outstanding engine cleanliness Excellent wear protection High lubrication reliability Saves fuel and reduces pollutant emissions High shear stability Optimum stability to aging Optimum oil pressure under all operating conditions Excellent high and low temperature behavior Long engine service life Tested for turbochargers and catalytic converters Areas of Application: Specially adapted to the high demands of Jaguar, Land Rover and Mercedes-Benz in various gasoline and diesel engines. Suitable for extended oil change intervals and high engine loads. Application: The specifications and instructions from the unit or vehicle manufacturer must be followed. Optimum effectiveness only when the product is used unmixed. Specifications: ACEA C5 API SN Jaguar Land Rover STJLR.51.5122 MB 229.71 Typical Test Data: Property Method Result Viscosity SAE class SAE J300 0W-20 Density at 15 °C DIN 51757 0.845 g/cm³ Viscosity at 40 °C ASTM D 7042-04 39.5 mm²/s Viscosity at 100 °C ASTM D 7042-04 8.3 mm²/s Viscosity at -40 °C (MRV) ASTM D 4684 < 60000 mPas Viscosity at -35 °C (CCS) ASTM D 5293 < 6200 mPas Viscosity index DIN ISO 2909 193 HTHS at 150°C ASTM D 5481 ≥ 2.6 mPas Pour point DIN ISO 3016 -48 °C Flash point DIN ISO 2592 226 °C Evaporation loss (Noack) ASTM 5800B 11.9 % Total base number DIN ISO 3771 7.9 mg KOH/g Colour / appearance - Brownish Sulfate ash DIN 51575 0.8 % Colour number (ASTM) DIN ISO 2049 L 2.0