Happymodel Mobula8 1-2S 85mm EX1103 KV11000 Micro FPV Whoop Drone, ELRS/Frsky/PNP - PNP(No Receiver)

Full Feature List

• X12 5-IN-1 AIO flight controller built-in 2.4G ELRS V2.0 and OPENVTXVTX Power up to 400mwELRS V2.0 (Default)
• provide firmware to support ELRS V3.0 EX1103 KV11000 motors
• CaddxFPV Ant FPV camera
• Smooth and powerful
• Compatible with 1S-2S Lipo/LIHV battery Recommended Match (1)
• Jumper Bumblebee HALL/RDC50 ELRS 2.4G FPV Controller Compact & Full-Featured FPV (2)
• Radio
• Master Pocket 2.4GHz 16CH ELRS/CC2500 Hall Gimbals Radio Controller for FPV Racing Drones Recommend 2S 450mah/550mah/650mah battery (Not include) GNB 450m
• Ah 2S HV Li
• Po Battery 7.6V 80/160C XT30 Plug GAONENG/GNB 530mah 2S 7.6V HV 90C Li
• Po Battery XT30 Plug Specifications for happymodel mobula8: Brand Name: Happymodel
• Item Name: Mobula 8 Micro FPV 1-2S whoop drone
• Wheelbase: 85mm
• Size: 120mm*120mm*50mm
• Weight: 43g Receiver option: 2.4G ELRS SPI (Support ELRS v2.0
• provide firmware could compatible with ELRS v3.0)SPI Frsky D8/D16 not compatible with EMAX E6 radioSPI Flysky AFHDS2A Spare parts

Specifications

• Motor Mode: EX1103 KV11000Configu-ration: 9N12PStator Diamter: 11mmStator Length:3mmShaft Diameter: Φ1.5mmMotor Dimension (Dia.*Len):Φ13.5mm*15.5mmWeight(g): 3.8gNo.of Cells(Lipo): 1-2S Propellers Weight: 0.88gMaterial: PCPitch: 2.3inchProps Dia: 52.17mmCenter Thickness: 5mmCenter Hole Dia: 1.5mm Flight controller X12 ELRS V2.1 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280X12 Frsky V2.1 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FRX12 Flysky V1.0 flight controller built-in SPI Flysky 2.4G receiver Target: CRAZYBEEF4FSMCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: ICM20689 or ICM42688P(SPI connection)Mount hole size: 25.5mm*25.5mmPower supply: 1-2S battery input (DC 2.9V-8.7V)Built-in 12A(each) Blheli_S 4in1 ESCBuilt-in Betaflight OSD(SPI Control)Built-in 5.8G OpenVTX 0mw~400mwBuilt-in ExpressLRS 2.4G,Frsky D8/D16,Flysky AFHDS 2ABuilt-in voltage detectionBuilt-in current sensor Onboard 4in1 ESC Power supply: 1-2S LiPo/LiPo HVCurrent: 12A continuous peak 15A (3 seconds)Support BLHeliSuite programmableFirmware target: Z_H_30 Default protocol: DSHOT300Support Bluejay firmware Onboard SPI ExpressLRS 2.4GHz Receiver Packet Rate option: 50Hz/150Hz/250Hz/500HzExpressLRS Firmware version: V2.0RF Frequency: 2.4GHzAntenna : SMD antennaTelemetry output Power: <12dBmReceiver protocol: SPI ExpressLRSCompatible with ExpressLRS V2.0 TX ModuleCouldn’t flash separately ExpressLRS firmwareCould flash FC firmware to support ExpressLRS v3.0 TX module Onboard SPI Frsky D8/D16 receiver Version SPI BUS receiver Frsky D8/D16 compatibleCompatible Non EU transmitter D8/D16 modelChannels: 8ch/16chNo ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support Onboard SPI Flysky receiver Version SPI BUS receiverProtocol: AFHDS-2AChannels: 14ch(AFHDS-2A)No ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support Onboard 5.8g OPENVTX Firmware version: OPENVTXSmartaudio v2.1PIT Mode supportRCE Mode supportChannels:48chTransmitting Power: 0/RCE/25mw/100mw/400mwPower supply: DC 5VCurrent (5v): <650ma (400mw) Caddx ANT 1200tvl camera Image Sensor: 1/3″ CMOS SensorHorizontal Resolution: 1200 TVLTV System: NTSC or PALIMAGE: 16:9 or 4:3Synchronization: InternalElectronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000S/N Ratio : >52dB (AGC OFF)Video Output: CVBSLens: 1.8mmMin. Illumination: [email protected] Gain Control: YESWDR: Global WDRDNR: 3D DNRDimensions: 14*14mm(with bracket to 19*19mm)Wide Power Input: DC 3.7-18VWeight: 2g (N.W.)

What's in the Box