Happymodel Mobula7 1S HD 75mm Brushless Whoop Drone, ELRS/Frsky/PNP - PNP(No SPI)

Full Feature List

• X12 5-IN-1 AIO flight controllerVTX Power up to 400mwELRS V2.0 SupportNEW RS0802 KV20000 motors1080P HD Video record
• Blackbox Ready support GYROFLOWSmooth and powerful
• Compatible for 1S Lipo/LIHVRecommend 1S 450mah/550mah/650mah batteries (Not include) Lipo Battery：(not included) Recommend battery: 520m
• Ah 1S 3.8V Li
• Po Battery

Specifications

• Brand Name: HappymodelItem Name: Mobula7 1S HD 75mm Micro FPV whoop droneWheelbase: 75mmSize: 99mm*99mm*45.5mmWeight: 33g Receiver option:SPI 2.4GHz ELRS V2.0SPI Frsky D8/D16 Spare parts

Specifications

• MotorMode: RS0802 KV20000Configu-ration:9N12PStator Diamter:8mmStator Length:2mmShaft Diameter:Φ1.5mmMotor Dimension(Dia.*Len):Φ10.5mm*13.5mmWeight(g):2.0gNo.of Cells(Lipo):1S only PropellersWeight:0.24gMaterial:PCPitch:1 inchProps Dia:40mmCenter Thickness:5mmCenter Hole Dia:1.5mm If you want to buy extra propeller,please click here Flight controllerX12 ELRS V2.0 flight controller built-in ELRS 2.4G receiver Target: CRAZYBEEF4SX1280X12 Frsky V1.0 flight controller built-in SPI Frsky 2.4G receiver Target: CRAZYBEEF4FRMCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: ICM20689(SPI connection)Mount hole size: 25.5mm*25.5mmPower supply: 1S battery input (DC 2.9V-4.35V)Built-in 12A(each) Blheli_S 4in1 ESCBuilt-in Betaflight OSD(SPI Control)Built-in 5.8G OpenVTX 0mw~400mwBuilt-in ExpressLRS 2.4G,Frsky D8/D16Built-in voltage detectionBuilt-in current sensor Onboard 4in1 ESCPower supply: 1S LiPo/LiPo HVCurrent: 12A continuous peak 15A (3 seconds)Support BLHeliSuite programmableFactory firmware: Z_H_30_REV16_7.HEXDefault protocol: DSHOT300Support Bluejay firmwareWhen use Blujay firmware with 48khz, should set startup power to 1100/1200 Onboard SPI ExpressLRS 2.4GHz ReceiverPacket Rate option: 50Hz/150Hz/250Hz/500HzExpressLRS Firmware version: V2.0RF Frequency: 2.4GHzAntenna : Enameled copper wire length 30mmTelemetry output Power: <12dBmReceiver protocol: SPI ExpressLRSCompatible with ExpressLRS V2.0 TX ModuleCouldn’t flash separately ExpressLRS firmware Onboard Frsky SPI D8/D16 receiver VersionSPI BUS receiver Frsky D8 D16 compatibleCould working on FRSKY D8/D16/D16 LBT/REDPINE/SFHSS protocolChannels: 8ch or 16CHNo ground interference ( Transmitter and receiver 1 m from the ground): 200meterFailsafe support Onboard 5.8g OPENVTXFirmware version: OPENVTXSmartaudio v2.1PIT Mode supportRCE Mode supportChannels:48chTransmitting Power: 0/RCE/25mw/100mw/400mwPower supply: DC 5VCurrent (5v): <650ma (400mw) Runcam Split3-LiteModel: RunCam Split3-LiteField of View(FOV):Recording FOV 165°(FPV FOV: 165 ° @16:9, 130 ° @4:3)Video Resolution:1080@60fps/1080@50fps/1080@30fps/720@60fpsVideo File Format: MOVImage Resolution:2 MPTV Mode: NTSC (720*480)/PAL (720*576) SwitchableInterface: JST 1.25mm / UART and SH 1.0mmMax Micro SD Card Supported 64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II/UHS-III)Hole Distance of Installation: 25.5*25.5mmPCB Size: 29*29mmLens Module Size: 14*14mmLens Specs: M9Power Input: DC 5-20V(Non-direct power supply from battery. Powered directly with battery will generate surges and burn the camera.)Working Current: 450mA @5V External Blackbox and voltage booster moduleSize:18*15.5*4.5With Built-in Voltage booster moduleWeight:1.5gramSD Card support max to 32GBSD Card need to use FAT32 FormatNotes: Need to careful to insert the TF SD Card , and don’t pull it out while install the battery.

What's in the Box