Happymodel Mobula6 1S 65mm Brushless Whoop BNF V2.0 - Frsky SPI Receiver / Standard Edition (19000KV)

Full Feature List

• AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTXExtreme light 1S 65mm Brushless whoop only 20g
• Runcam Nano3 The lightest 1/3 CMOS 800TVL Camera
• Smooth and powerful
• Compatible for 1S Lipo/LIHVCamera Angle adjustable

Specifications

• Brand Name: HappymodelItem Name: Mobula6 1S 65mm Brushless whoop drone BNF versionWheelbase: 65mmSize: 80mm*80mm*37mmNet weight: 20g(without battery)Takeoff weight: 28g Receiver option:Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode)Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter) Motor speed option:SE0802 KV25000(Race Edition)SE0802 KV19000(Regular Edition)

What's in the Box

Specifications

• Motor Mode: SE0802 19000KV or KV25000Configu-ration:9N12PStator Diamter:8mmStator Length:2mmShaft Diameter:Φ1mmMotor Dimension(Dia.*Len):Φ10.5mm*14.9mmWeight(g):1.9gNo.of Cells(Lipo):1S only Propellers Gemfan 1219-3 Center Thickness:5mm Prop Disk Diameter:31mm Center Hole Inner diameter:1.0mm Weight:0.28g CrazybeeF4 Lite v3.1 (updated since 17th Feb 2022) (Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR(Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS(DSM2/X SPI RX version) CRAZYBEEX DXS DSM2/X version firmware target: CrazybeeF4DXSMCU:STM32F411CEU6 (100MHZ, 512K FLASH)Sensor: ICM20689(SPI connection)Board size: 28.5 * 28.5MMPower supply: 1S battery input (DC 2.9V-4.35V)Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 readyBuilt-in Betaflight OSD(SPI Control)Built-in 5.8G VTXBuilt-in SPI Frsky/Flysky receiverBuilt-in 5V 1A BECBuilt-in voltage detection Onboard 4in1 ESC MCU upgraded to EFM8BB21Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)Support BLHeliSuite programmableFrsky/Flysky version Factory firmware: O_H_5_REV16_7.HEXDSM2/DSMX version Factory firmware:S_H_50_REV16_8.HEXDefault protocol: DSHOT600 Onboard Frsky SPI D8 receiver Version SPI BUS receiver Frsky D8 compatibleCompatible Non EU transmitter D8 modelChannels: 8chFailsafe supportNo ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m Onboard Flysky SPI receiver Version SPI BUS receiverProtocol: AFHDS and AFHDS-2A SwitchableChannels: 8ch(AFHDS) or 14ch(AFHDS-2A)No ground interference ( Transmitter and receiver 1 m from the ground): 100~200mFailsafe support Onboard 5.8g VTX(Openvtx) Output power: 0mw~400mwFrequency: 48CHInput voltage: 3.3V~5.5VCurrent consumption: 300mA(type)Frequency: 5.8GHz 5bands 48 channelsWith Race band Smartaudio ready Runcam Nano3 Model: RunCam Nano 3Image Sensor: 1/3" CMOSHorizontal Resolution: 800TVLLens : 2.1mm(M8) FOV 160°Signal System: PAL/NTSC Non SwitchableS/N Ratio: >50dBElectronic Shutter Speed: AutoAuto Gain Control (AGC): AutoMin. Illumination: [email protected]: AutoDay/Night: ColorPower:DC 3-5.5VCurrent: 110mA@5V [email protected] Material: ABSNet Weight: 1.2gDimensions: L14mm*W14mm*H9mm Lipo Battery Capacity:300mAhVoltage:3.8vContinuous Discharge Rate: 30CSize: 57mmx12mmx7mmWeight: 8gConnector: PH2.0