Happymodel Moblite7 Walksnail 1S 75mm HD Brushless Whoop, ELRS - ExpressLRS SPI RX+Walksnail Goggle

Notes Recommend use the battery with lead wire. Both A30 and BT2.0 plug battery are compatible. Specifications Brand Name: Happymodel Model: Moblite7 Walksnail V3 Frame Wheelbase: 75mm Weight: 34.5g (without battery) Size: 98mm × 98mm × 48mm UART ELRS: v3.0 Ready Battery Compatibility: 1S Lipo / Lihv Battery Plug: GNB A30 Onboard Blackbox: Ready Package Includes Item Name Qty Mobula7 v4 75mm Frame + Canopy 1 SuperX HD ELRS AIO Flight Controller 1 Happymodel 1002 KV20000 Unibell Brushless Motor 4 Gemfan 1610-2 Bi-blade Propeller (4CW + 4CCW) 1 Set Walksnail Avatar Nano HD Camera 1 Walksnail Avatar Mini 1S TX Module 1 Spare Canopy 1 Propeller Disassemble Tool 1 Screw Driver 1 Flight Controller: SuperX HD ELRS Betaflight 4.4.2 Ready Firmware Target: CRAZYBEEF4DX MCU: STM32F411CEU6 (100MHz, 512K FLASH) Sensor: BMI270 or ICM42688P (SPI) Power Supply: 1-2S Lipo / Lihv (DC 2.8V~8.7V) – Only 1S supported for this drone Built-in: 12A Blheli_S 4in1 ESC (DSHOT300), 5V 1A BEC, UART ELRS receiver (ELRS v3.0 ready), Voltage detection Bluejay ESC Firmware Ready Onboard 4in1 ESC Support: 1-2S Lipo / Lihv Current: 12A Continuous / 15A Peak (3s) Factory Firmware: Z-H-30 – Bluejay, 0.19, 48kHz Support ESC-Configurator / BLHeli_S Suite Onboard UART ExpressLRS 2.4GHz Receiver RF Frequency: 2.4GHz Antenna: 31mm enameled copper wire Telemetry Output Power: <12dBm Protocol: CRSF Firmware Version: ExpressLRS v3.0.1 Supports updates via ExpressLRS Configurator / WIFI / Betaflight pass-through Motor: 1002 20000KV Configuration: 9N12P Stator: 10mm Diameter, 2mm Length Shaft Diameter: Φ1.5mm Dimensions: Φ13.5mm × 12.5mm Weight: 2.5g Voltage: 1S Only Propeller: Gemfan 1610-2 Bi-blade Weight: 0.24g Material: PC Pitch: 1 inch Diameter: 40mm Center Hole: 1.5mm VTX: Walksnail Avatar Mini 1S Frequency: 5.725 – 5.850 GHz Transmitter Power (EIRP): FCC: <25.5dBm, CE: <14dBm, SRRC: <20dBm, MIC: <25dBm Mounting Holes: 25.5 × 25.5mm Dimensions: 33 × 33 × 6.5mm Storage: 8GB Recording: 1080p / 720p OSD: Canvas Mode Bitrate: 25Mbps / 50Mbps Latency: ~22ms Weight: 6.8g Power Input: 3.1V – 5V Camera: Walksnail Avatar Nano Sensor: 1/2.7” CMOS Resolution: 1080p@60fps, 720p@120fps / 60fps Ratio: 16:9 / 4:3 Lens: 2.1mm (FOV 170°, Aperture F2.0) Shutter: Rolling Min.

Illumination: 0.001Lux Weight: 3.5g Dimensions: 14 × 14 × 17mm Cable: 45mm Coaxial Manuals:Moblite7 Walksnail HD 1S SPI ELRS version manual documentMoblite7 Walksnail HD 1S SPI FRSKY version manual document Dump files for Betaflight 4.3.0:Moblite7 walksnail frsky dumpMoblite7 Walksnail SPI ELRS dump Dump files for Betaflight 4.4.2:Moblite7 Walksnail V2 dump file for betaflight 4.4.2 versionMoblite7 Walksnail V3 dump file for betaflight 4.4.2 version Firmware:Betaflight_4.3.0_RC3_STM32F411_FrskyBetaflight_4.3.1_CRAZYBEEF4SX1280_support_ELRSV2.0Betaflight_4.3.1_CRAZYBEEF4SX1280_support_ELRSV3.0Betaflight 4.4.2 firmware for Moblite7 Walksnail V3