Happymodel 2.4g ExpressLRS ELRS nano series receiver module PP RX/ EP1 RX/ EP2 RX - T-Antenna(2pcs 40mm Length)

Since the Official Perfect version of ELRS firmware has not been released yet, currently our PP_RX, EP1/EP2 RX and ES24TX pre-loaded firmware are all beta versions, you can upgrade the official firmware when Official perfect target available. More details: https://github.com/ExpressLRS/ExpressLRS The Happymodel 2.4GHz ELRS nano series receiver is an open source program based on ExpressLRS, we have 3 types rx module released. The PP RX is designed by @Jye Smith from ExpressLRS development team.

Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It has a built-in ceramic antenna, which is super light and small in size. On the basis of PP RX, we have developed the Nano 2.4GHz rx of ESP8285 version named EP1 and EP2.

The RF module of EP1/EP2 is the same like PP RX and use ESP8285 MCU . So you can upgrade firmware by WIFI , that's too simple . Due to the low-latency and high-refresh-rate RF module, they are very comfortable for FPV race and Long Range FPV.

And very suitable for Tiny whoop because of the ultra light and Nano size. PP(w/ antenna) EP1(w/o antenna) EP2(w/ antenna) MCU STM32L432KBU6 ESP8285 ESP8285 RF Chip SX1280IMLTRT SX1280IMLTRT SX1280IMLTRT Antenna SMD Ceramic Omnidirectional SMD Ceramic Dimension 10mm*10mm*6mm 10mm*10mm*3mm 10mm*10mm*6mm Weight 0.47g 0.42g 0.44g Firmware target 6cb8152d aec8ad82 aec8ad82 Firmware upload Betaflight pass-through Wifi Wifi How to Setup ExpressLRS Happymodel 2.4GHz TX and RX？

1*PP_RX Or1*EP1_RX(include 1pcs 40mm and 1pcs 90mm antenna）Or1*EP2_RX Or1*T-Antenna