Bambu Lab X1/X1CP1P/P1S/A1 257x257 Build Plate X1C Pei Peo H1H Pey - PEI-PET

Bambu Lab X1/X1CP1P/P1S/A1 257x257 Build Plate X1C Spring Steel Sheet Pei Peo H1H Pey For 3d Printer Bambulab Bamboo lab Please note： There is a protective film. Please peel the film before using. PEO/PET to print PLA , PETG; PED to print PLA, PETG, TPU; PEY to print PLA, PETG, TPU, ABS. H1H to print PLA, TPU, PETG, ABS. PEI to print PLA /PETG/PC/ABS /TPU /Nylon etc. PEF-Flake to print PLA/PETG/TPU/ABS Packing list 1x Upgrade 257*257mm Build Plat Structural analysise0eTransparent filmPrevent film scratches duringtransportationPEY light columnYou can directly have colorfuland cool patterns on your model.Spring steel plateThe spring steel plate is made ofstainless steel and can be restoredto flatness no matter how it is bentPEY Phantom Duplex printConvenient, durable, and practicaThe PEY light column/phantom magnetic steel film allows you to print modelswith colorful and cool patterns at the bottom. Different colors will appear underdifferent lighting and angles, and the model will be printed more than100 times without damage. The film has two printing sides,which you can print on the frontand back, allowing you to fullyutilize it. The coating is not easily peeled off or scratched Suggested printing temperature isPLA 60-65°C/PETG70-80'CABS 90-100'C/TPU 30-40° Easy to take out moldNo need to rely on other toolsSimply bend the spring steel plate by hand, and the model can be easily disassembled without deformation, and then restored to a flat state.You can even remove the model without cooling Bambu labxl/plpPEl Spraying+PEY Starry sky filmSupports double-sided printing Structure DescriptionPROTECTIVE FILM TOPREVENT SCRATCHESBefore printing, remove the plastic film on the surface of the PEY steel plate PEY FILMSmooth PEY has excellent adhesion, seven better than smooth peI, highly recommend to print PLA / TPU /PETGBesides, magical and colorful pattern will be shine on itself and printing model.SPRING STEEL SHEETSpring steel sheet is made of stainless steel,no matter how bent it is , it can return toflatnessand with fillets of the four cornersprotects your hand from geting hurt .TEXTURED PEIWe put a popular textured PEl on the third laver, to achieve double printing sides using, and it is suitable for printing PLA /PETG/PC/ABS /TPU /NyIon / PLA-CF etc. Starry skyIt presents different patternsunder different intensities of light Printing without warping edgesStrong viscosity and easy to removeYou only need to bend the magnet by hand to easily demould, andthe bottom of the model is smooth with a coloredholographic texture, without the need for other tools. So Easy to take out modelsWhether you bend the spring steel plate or not, you can remove themodel from the plate directly, So in some cases, you don't have totake the spring steel plate out of printer Don't need touse glue, easy to usePEO and PEl materials increase the adsorption force on the printedmodel, making the bottom surface of the printed model smooth,Easy to clean, just wipe it off with a wet tissue or alcohol before printing. Strong adsorption capacityHigh temperature resistance, scratch resistance, no deformation.PEY and PEl must be used with the magnetic base . Please make sure youalreadyhave a magnetic base at home before you buy the one withoutmagnetic base Suits variety of filaments. especially for PLAAfter our extensive testing, we recommend PEO to print PLA and TPU and PETG PEI print PLA /PETG/PC/ABS /TPU /Nylon etc Strong adsorption capacity High temperature resistance scratch resistance, no deformation.PEO and PEL must be used with the magnetic base . Please make sure youalreadyhave a magnetic base at home before you buy the one withoutmagnetic base