2025 Happymodel Mobula7 Freestyle HD BNF 75mm Ultra-Light BNF HDZero AIO5 Whooping

2025 Upgraded & New Release! The Happymodel Mobula7 Freestyle BNF is an ultra-light 75mm indoor freestyle drone, designed specifically for HD freestyle flying. Weighing only 24.5 grams, this drone features the new HDZero AIO5 Flight Controller, providing an integrated flying experience. The Mobula7 is equipped with high-efficiency RS0802 KV25000 brushless motors and HQPROP 1.6-inch three-blade ultra-light propellers, delivering a superior freestyle flying experience. Note: Happymodel Mobula7 Freestyle HD how in stock! Recommended Match (1)Jumper Bumblebee HALL/RDC50 ELRS 2.4G FPV Controller Compact & Full-Featured FPV (2)RadioMaster Pocket 2.4GHz 16CH ELRS/CC2500 Hall Gimbals Radio Controller for FPV Racing Drones Key Features Weight: Only 24.5g for ultimate lightweight performance. Efficient Motor: Powered by RS0802 KV25000 brushless motors (Upgraded from KV20000), designed for high-speed and agile maneuvers. Propellers: HQPROP 1.6-inch ultra-light three-blade propellers for enhanced freestyle capabilities. Flight Controller: New HDZero AIO5 Flight Controller, integrated with STM32F411 MCU, ICM42688P Gyro, and 5A BLHeli_S 4-in-1 ESC. Video Transmission: Built-in 5.8GHz HDZero VTX for high-definition video transmission. Receiver: Integrated SPI ExpressLRS 2.4GHz Receiver, compatible with ExpressLRS v3.0 for low-latency control. Camera: HDZero Lux Camera with 720p60 resolution, wide field of view (FOV) for superior video quality. Battery: Supports 1S 450mAh/550mAh/650mAh A30 or BT2.0 interface for various power options. Compatibility: Compatible with Betaflight firmware and pre-installed Bluejay ESC firmware. New Release: This is the 2024 December edition with the latest improvements and features. Product Highlights (Features) Flight Controller & Electronics MCU: STM32F411 (100MHz, 512K Flash) Gyroscope: ICM42688P Onboard Voltage and Current Meter 5A BLHeli_S 4-in-1 ESC Pre-installed Bluejay ESC Firmware 5V 1A BEC for power regulation HDZero 5.8GHz VTX (video transmitter) SPI ExpressLRS 2.4GHz Receiver (compatible with ExpressLRS v3.0) Camera & Video Transmission HDZero Lux Camera Sensor Size: 1/2 inch Resolution: 720p60 (4:3 and 16:9 formats) Field of View (FOV): 155° diagonal, 126° horizontal, 94° vertical (4:3) 145° diagonal, 126° horizontal, 70° vertical (16:9) Wide Dynamic Range (WDR) Motor & Propellers Motor: RS0802, KV25000 Stator Diameter: 8mm Stator Length: 2mm Shaft Diameter: Φ1.5mm Weight: 2.0g Propellers: HQPROP 1.6-inch ultra-light three-blade design for freestyle flying. Battery & Power Battery Type: 1S 450mAh/550mAh/650mAh Lipo Charging Time: ~50 minutes Flight Time: Approx. 25 minutes (FPV version approx. 15 minutes) Specifications Specification Details Weight 24.5g Recommended Battery 1S 450mAh/550mAh/650mAh A30 or BT2.0 Propeller Size 40mm MCU STM32F411 (100MHz, 512K Flash) Gyroscope ICM42688P ESC 5A BLHeli_S 4-in-1 VTX 5.8GHz HDZero VTX Receiver SPI ExpressLRS 2.4GHz Camera HDZero Lux, 720p60, WDR Motor RS0802 KV25000, 2.0g Battery 1S 450mAh/550mAh/650mAh Lipo Charging Time ~50 minutes Flight Time 25 minutes (FPV: 15 minutes) Size 114×49×32mm Net Weight 98g What's Included 1x Happymodel Mobula7 Freestyle BNF 1S 1x Spare Camera Cover 1x Spare Propeller Set 1x Screwdriver 1x Propeller Removal Tool Default port and receiver settings: Default factory Firmware with presettings Betaflgiht 4.5.1 AIO5_BF4.5.1 Default factory dump file for betaflight 4.5.1 Betaflight 4.5.1 default factory dump for Mobula7 freestyle HD Default factory Firmware with presettings Betaflgiht 4.4.2 AIO5_BF4.4.2 Default factory dump file for betaflight 4.4.2 Betaflight 4.4.2 default factory dump for Mobula7 freestyle HD 3D Print file for Antenna fixed holder: Antenna fixed holder for Mobula6 and Mobula7 freestyle HD